Why You Should Consider Professional Plumber Installation for Your Dishwasher

Why You Should Consider Professional Plumber Installation for Your Dishwasher

Blog Article

Booking Page
How to install a dishwasher safely
From carrying a dishwashing machine right into your home to attaching the water links, setting up a dish washer can use up to five hours. If you do not have the right tools, it can take even much longer. To make your life much easier and to prevent mounting a dishwashing machine inaccurately, we suggest working with an expert plumber. A plumber will certainly have the right tools accessible and can mount your brand-new dishwashing machine in under 2 hours. If you're not quite persuaded yet, keep checking out to learn why you ought to hire a plumber.

Not Installing Your Dishwashing Machine Appropriately Can Lead to a Mountain of Troubles

Not just can mounting a dishwashing machine properly nullify your guarantee, however it can also create a mess. If you incorrectly mount your dishwashing machine to the rubbish disposal, you may see poignant scents or have deposit on your meals.

An Improper Setup Can Nullify the Dishwasher's Warranty

Prior to installing a dish washer on your own, you need to read the service warranty thoroughly. Unless you are convenient as well as have experience installing dishwashing machines, you should employ a plumber so you don't risk your guarantee.

Installing a Dishwashing Machine Requires a Range of Devices

You might require to make a trip to Lowe's or Residence Depot if you do not have a variety of devices on hand. To mount a dishwasher, you require the following tools: pliers, a flexible wrench, a set of screwdrivers, a tube cutter, and opening saws. You will certainly likewise require cleaning materials such as a superficial bucket as well as sponge. If you do not have any one of these items, the expense to purchase them can build up rapidly.

A Plumber Can Check the Supply Lines

A supply line, especially a dishwasher connector, links the dishwashing machine to a water resource. If you buy a new supply line, a plumber can guarantee that the line is compatible with both your dishwashing machine as well as water resource. A professional plumber can inspect it to ensure that it's in good condition and does not have any leaks if you decide to use an existing supply line.

A Plumber Can Finish the Job Affordably and also Promptly

You do not intend to get stuck washing your dishes by hand. A plumber can install your dish washer in one to 2 hrs. The typical plumber won't charge even more than a pair of hundred bucks to install your dishwasher. Why risk your service warranty and also potentially have to acquire a brand-new dishwashing machine? Take the easy and secure course by employing a plumber.
From transporting a dishwasher right into your home to affixing the water links, installing a dish washer can take up to five hours. To make your life less complicated as well as to avoid mounting a dishwashing machine incorrectly, we suggest hiring a specialist plumber. A plumber will have the right devices on hand as well as can install your brand-new dishwasher in under 2 hours. Unless you are convenient and also have experience installing dishwashing machines, you should employ a plumber so you don't risk your guarantee.
A supply line, specifically a dishwashing machine connector, links the dishwasher to a water resource.

How To Install A Dishwasher

Installing A Dishwasher Yourself

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

Steps Involved In Dishwasher Installation

Step One: Gather the Necessary Supplies

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

  • A screwdriver

  • • A hose clamp

  • • Duct tape (optional)

  • • A brass fitting

  • • Teflon tape

  • • A pair of pliers

  • • An adjustable wrench

  • • A drill

  • • Braided steel water line

  • • A pair of rubber hand gloves (optional)

  • • Wire nuts

  • Step Two: Take Safety Measures

    First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

    Step Three: Remove the Old Dishwasher

    This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

    Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

    Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

    With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

    Skip this step if you are having a dishwasher installed for the first time in your kitchen.

    Step Four: Install the New Dishwasher

    Connect the Water Supply

    Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

    Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

    Attach the Drain Line

    Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

    Slide the Dishwasher into Place

    Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

    Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.


    Call Today

    Report this page